Living Standard — Last Updated 5 December 2024
button
elementdetails
and summary
elementsinput
element as a text entry widgetinput
element as domain-specific widgetsinput
element as a range controlinput
element as a color
wellinput
element as a checkbox and radio button widgetsinput
element as a file upload controlinput
element as a buttonmarquee
elementmeter
elementprogress
elementselect
elementtextarea
elementUser agents are not required to present HTML documents in any particular way. However, this section provides a set of suggestions for rendering HTML documents that, if followed, are likely to lead to a user experience that closely resembles the experience intended by the documents' authors. So as to avoid confusion regarding the normativity of this section, "must" has not been used. Instead, the term "expected" is used to indicate behavior that will lead to this experience. For the purposes of conformance for user agents designated as supporting the suggested default rendering, the term "expected" in this section has the same conformance implications as "must".
The suggestions in this section are generally expressed in CSS terms. User agents are expected to either support CSS, or translate from the CSS rules given in this section to approximations for other presentation mechanisms.
In the absence of style-layer rules to the contrary (e.g. author style sheets), user agents are expected to render an element so that it conveys to the user the meaning that the element represents, as described by this specification.
The suggestions in this section generally assume a visual output medium with a resolution of 96dpi or greater, but HTML is intended to apply to multiple media (it is a media-independent language). User agent implementers are encouraged to adapt the suggestions in this section to their target media.
An element is being rendered if it has any associated CSS layout boxes, SVG layout boxes, or some equivalent in other styling languages.
Just being off-screen does not mean the element is not being rendered. The presence of the attribute normally means the element is not being rendered, though this might be overridden by the style sheets.
The fully active state does not affect whether an element is being rendered or not. Even if a document is not fully active and not shown at all to the user, elements within it can still qualify as "being rendered".
An element is said to intersect the viewport when it is being rendered and its associated CSS layout box intersects the viewport.
Similar to the being rendered state, elements in non-fully active documents can still intersect the viewport. The viewport is not shared between documents and might not always be shown to the user, so an element in a non-fully active document can still intersect the viewport associated with its document.
This specification does not define the precise timing for when the intersection is tested, but it is suggested that the timing match that of the Intersection Observer API. [INTERSECTIONOBSERVER]
An element is delegating its rendering to its children if it is not being rendered but its children (if any) could be rendered, as a result of CSS 'display: contents', or some equivalent in other styling languages. [CSSDISPLAY]
User agents that do not honor author-level CSS style sheets are nonetheless expected to act as if they applied the CSS rules given in these sections in a manner consistent with this specification and the relevant CSS and Unicode specifications. [CSS] [UNICODE] [BIDI]
This is especially important for issues relating to the 'display', 'unicode-bidi', and 'direction' properties.
The CSS rules given in these subsections are, except where otherwise specified, expected to be used as part of the user-agent level style sheet defaults for all documents that contain HTML elements.
Some rules are intended for the author-level zero-specificity presentational hints part of the CSS cascade; these are explicitly called out as presentational hints.
When the text below says that an attribute attribute on an element element maps to the pixel length property (or properties) properties, it means that if element has an attribute attribute set, and parsing that attribute's value using the rules for parsing non-negative integers doesn't generate an error, then the user agent is expected to use the parsed value as a pixel length for a presentational hint for properties.
When the text below says that an attribute attribute on an element element maps to the dimension property (or properties) properties, it means that if element has an attribute attribute set, and parsing that attribute's value using the rules for parsing dimension values doesn't generate an error, then the user agent is expected to use the parsed dimension as the value for a presentational hint for properties, with the value given as a pixel length if the dimension was a length, and with the value given as a percentage if the dimension was a percentage.
When the text below says that an attribute attribute on an element element maps to the dimension property (ignoring zero) (or properties) properties, it means that if element has an attribute attribute set, and parsing that attribute's value using the rules for parsing nonzero dimension values doesn't generate an error, then the user agent is expected to use the parsed dimension as the value for a presentational hint for properties, with the value given as a pixel length if the dimension was a length, and with the value given as a percentage if the dimension was a percentage.
When the text below says that a pair of attributes w and h on an
element element map to the aspect-ratio property, it means that if
element has both attributes w and h, and parsing those
attributes' values using the rules for parsing non-negative integers doesn't
generate an error for either, then the user agent is expected to use the parsed integers as a
presentational hint for the 'aspect-ratio'
property of the form auto w / h
.
When the text below says that a pair of attributes w and h on an
element element map to the aspect-ratio property (using dimension rules), it
means that if element has both attributes w and h, and parsing
those attributes' values using the rules for parsing dimension values doesn't
generate an error or return a percentage for either, then the user agent is expected to use the
parsed dimensions as a presentational hint for the
'aspect-ratio' property of the form auto
w / h
.
When a user agent is to align descendants of a node, the user agent is expected to
align only those descendants that have both their 'margin-inline-start' and
'margin-inline-end' properties computing to a value other than 'auto', that are
over-constrained and that have one of those two margins with a used value forced to a
greater value, and that do not themselves have an applicable align
attribute. When multiple elements are to align a
particular descendant, the most deeply nested such element is expected to override the others.
Aligned elements are expected to be aligned by having the used
values of their margins on the line-left and line-right sides be
set accordingly. [CSSLOGICAL] [CSSWM]
@namespace "http://www.w3.org/1999/xhtml" ;
area, base, basefont, datalist, head, link, meta, noembed,
noframes, param, rp, script, style, template, title {
display : none;
}
{
display : none;
}
[hidden=until-found i]:not(embed) {
content-visibility : hidden;
}
embed[hidden] { display : inline; height : 0 ; width : 0 ; }
input[type=hidden i] { display : none !important; }
@media (scripting) {
noscript { display: none !important; }
}
@namespace "http://www.w3.org/1999/xhtml" ;
html, body { display : block; }
For each property in the table below, given a body
element, the first attribute
that exists maps to the pixel length property on the body
element. If
none of the attributes for a property are found, or if the value of the attribute that was found
cannot be parsed successfully, then a default value of 8px is expected to be used for that
property instead.
Property | Source |
---|---|
'margin-top' | The body element's marginheight attribute
|
The body element's topmargin attribute
| |
The body element's container frame element's marginheight attribute
| |
'margin-right' | The body element's marginwidth attribute
|
The body element's rightmargin attribute
| |
The body element's container frame element's marginwidth attribute
| |
'margin-bottom' | The body element's marginheight attribute
|
The body element's bottommargin attribute
| |
The body element's container frame element's marginheight attribute
| |
'margin-left' | The body element's marginwidth attribute
|
The body element's leftmargin attribute
| |
The body element's container frame element's marginwidth attribute
|
If the body
element's node document's node navigable is
a child navigable, and the container of that
navigable is a frame
or iframe
element, then the
container frame element of the body
element is that frame
or
iframe
element. Otherwise, there is no container frame element.
The above requirements imply that a page can change the margins of another page
(including one from another origin) using, for example, an iframe
. This
is potentially a security risk, as it might in some cases allow an attack to contrive a situation
in which a page is rendered not as the author intended, possibly for the purposes of phishing or
otherwise misleading the user.
If a Document
's node navigable is a child navigable,
then it is expected to be positioned and sized to fit inside the content box of the
container of that navigable. If the container is not being rendered, the
navigable is expected to have a viewport with zero width and zero
height.
If a Document
's node navigable is a child navigable,
the container of that navigable is a
frame
or iframe
element, that element has a scrolling
attribute, and that attribute's value is an ASCII
case-insensitive match for the string "off
", "noscroll
", or "no
", then the user agent is expected to
prevent any scrollbars from being shown for the viewport of the
Document
's node navigable, regardless of the 'overflow'
property that applies to that viewport.
When a body
element has a background
attribute set to a non-empty value, the new value is expected to be encoding-parsed-and-serialized relative to
the element's node document, and if that does not return failure, the user agent is
expected to treat the attribute as a presentational
hint setting the element's 'background-image' property to the return
value.
When a body
element has a bgcolor
attribute set, the new value is expected to be parsed using the rules for parsing a legacy
color value, and if that does not return failure, the user agent is expected to treat the
attribute as a presentational hint setting the
element's 'background-color' property to the resulting color.
When a body
element has a text
attribute, its
value is expected to be parsed using the rules for parsing a legacy color value, and
if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the element's
'color' property to the resulting color.
When a body
element has a link
attribute, its
value is expected to be parsed using the rules for parsing a legacy color value, and
if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the 'color' property
of any element in the Document
matching the :link
pseudo-class to the resulting color.
When a body
element has a vlink
attribute,
its value is expected to be parsed using the rules for parsing a legacy color value,
and if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the 'color' property
of any element in the Document
matching the :visited
pseudo-class to the resulting color.
When a body
element has an alink
attribute,
its value is expected to be parsed using the rules for parsing a legacy color value,
and if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the 'color' property
of any element in the Document
matching the
:active
pseudo-class and either the :link
pseudo-class or the :visited
pseudo-class to the resulting color.
@namespace "http://www.w3.org/1999/xhtml" ;
address, blockquote, center, dialog, div, figure, figcaption, footer, form,
header, hr, legend, listing, main, p, plaintext, pre, search, xmp {
display : block;
}
blockquote, figure, listing, p, plaintext, pre, xmp {
margin-block : 1 em ;
}
blockquote, figure { margin-inline : 40 px ; }
address { font-style : italic; }
listing, plaintext, pre, xmp {
font-family : monospace; white-space : pre;
}
dialog:not([open]) { display : none; }
dialog {
position : absolute;
inset-inline-start : 0 ; inset-inline-end : 0 ;
width : fit-content;
height : fit-content;
margin : auto;
border : solid;
padding : 1 em ;
background-color : Canvas;
color : CanvasText;
}
dialog:modal {
position : fixed;
overflow : auto;
inset-block : 0 ;
max-width : calc ( 100 % - 6 px - 2 em );
max-height : calc ( 100 % - 6 px - 2 em );
}
dialog::backdrop {
background : rgba ( 0 , 0 , 0 , 0.1 );
}
[popover]:not(:popover-open):not(dialog[open]) {
display : none;
}
dialog:popover-open {
display : block;
}
[popover] {
position : fixed;
inset : 0 ;
width : fit-content;
height : fit-content;
margin : auto;
border : solid;
padding : 0.25 em ;
overflow : auto;
color : CanvasText;
background-color : Canvas;
}
:popover-open::backdrop {
position : fixed;
inset : 0 ;
pointer-events : none !important;
background-color: transparent;
}
slot {
display: contents;
}
The following rules are also expected to apply, as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
pre[wrap] { white-space : pre-wrap; }
In quirks mode, the following rules are also expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
form { margin-block-end : 1 em ; }
The center
element, and the div
element when it has an align
attribute whose value is an ASCII
case-insensitive match for either the string "center
" or the string
"middle
", are expected to center text within themselves, as if they had
their 'text-align' property set to 'center' in a presentational hint, and to align descendants to the center.
The div
element, when it has an align
attribute whose value is an ASCII case-insensitive match for the string "left
", is expected to left-align text within itself, as if it had its
'text-align' property set to 'left' in a presentational hint, and to align descendants to the left.
The div
element, when it has an align
attribute whose value is an ASCII case-insensitive match for the string "right
", is expected to right-align text within itself, as if it had its
'text-align' property set to 'right' in a presentational hint, and to align descendants to the right.
The div
element, when it has an align
attribute whose value is an ASCII case-insensitive match for the string "justify
", is expected to full-justify text within itself, as if it had its
'text-align' property set to 'justify' in a presentational hint, and to align descendants to the left.
@namespace "http://www.w3.org/1999/xhtml" ;
cite, dfn, em, i, var { font-style : italic; }
b, strong { font-weight : bolder; }
code, kbd, samp, tt { font-family : monospace; }
big { font-size : larger; }
small { font-size : smaller; }
sub { vertical-align : sub; }
sup { vertical-align : super; }
sub, sup { line-height : normal; font-size : smaller; }
ruby { display : ruby; }
rt { display : ruby-text; }
:link { color : #0000EE; }
:visited { color : #551A8B; }
:link:active, :visited:active { color : #FF0000; }
:link, :visited { text-decoration : underline; cursor : pointer; }
:focus-visible { outline : auto; }
mark { background : yellow; color : black; } /* this color is just a suggestion and can be changed based on implementation feedback */
abbr[title], acronym[title] { text-decoration : dotted underline; }
ins, u { text-decoration : underline; }
del, s, strike { text-decoration : line-through; }
q::before { content : open-quote; }
q::after { content : close-quote; }
br { display-outside : newline; } /* this also has bidi implications */
nobr { white-space : nowrap; }
wbr { display-outside : break-opportunity; } /* this also has bidi implications */
nobr wbr { white-space : normal; }
The following rules are also expected to apply, as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
br[clear=left i] { clear : left; }
br[clear=right i] { clear : right; }
br[clear=all i], br[clear=both i] { clear : both; }
For the purposes of the CSS ruby model, runs of children of ruby
elements that are
not rt
or rp
elements are expected to be wrapped in anonymous boxes
whose 'display' property has the value 'ruby-base'. [CSSRUBY]
When a particular part of a ruby has more than one annotation, the annotations should be distributed on both sides of the base text so as to minimize the stacking of ruby annotations on one side.
When it becomes possible to do so, the preceding requirement will be updated to be
expressed in terms of CSS ruby. (Currently, CSS ruby does not handle nested ruby
elements or multiple sequential rt
elements, which is how this semantic is
expressed.)
User agents that do not support correct ruby rendering are expected to render parentheses
around the text of rt
elements in the absence of rp
elements.
User agents are expected to support the 'clear' property on inline elements (in
order to render br
elements with clear
attributes) in the manner described in the non-normative note to this effect in CSS.
The initial value for the 'color' property is expected to be black. The initial value for the 'background-color' property is expected to be 'transparent'. The canvas's background is expected to be white.
When a font
element has a color
attribute, its value is expected to be parsed using the rules for parsing a legacy color
value, and if that does not return failure, the user agent is expected to treat the
attribute as a presentational hint setting the
element's 'color' property to the resulting color.
When a font
element has a face
attribute, the user agent is expected to treat the attribute as a presentational hint setting the element's 'font-family' property to the
attribute's value.
When a font
element has a size
attribute, the user agent is expected to use the following steps, known as the rules for
parsing a legacy font size, to treat the attribute as a presentational hint setting the element's 'font-size' property:
Let input be the attribute's value.
Let position be a pointer into input, initially pointing at the start of the string.
Skip ASCII whitespace within input given position.
If position is past the end of input, there is no presentational hint. Return.
If the character at position is a U+002B PLUS SIGN character (+), then let mode be relative-plus, and advance position to the next character. Otherwise, if the character at position is a U+002D HYPHEN-MINUS character (-), then let mode be relative-minus, and advance position to the next character. Otherwise, let mode be absolute.
Collect a sequence of code points that are ASCII digits from input given position, and let the resulting sequence be digits.
If digits is the empty string, there is no presentational hint. Return.
Interpret digits as a base-ten integer. Let value be the resulting number.
If mode is relative-plus, then increment value by 3. If mode is relative-minus, then let value be the result of subtracting value from 3.
If value is greater than 7, let it be 7.
If value is less than 1, let it be 1.
Set 'font-size' to the keyword corresponding to the value of value according to the following table:
value | 'font-size' keyword |
---|---|
1 | 'x-small' |
2 | 'small' |
3 | 'medium' |
4 | 'large' |
5 | 'x-large' |
6 | 'xx-large' |
7 | 'xxx-large' |
@namespace "http://www.w3.org/1999/xhtml" ;
[dir]:dir(ltr), bdi:dir(ltr), input[type=tel i]:dir(ltr) { direction : ltr; }
[dir]:dir(rtl), bdi:dir(rtl) { direction : rtl; }
address, blockquote, center, div, figure, figcaption, footer, form, header, hr,
legend, listing, main, p, plaintext, pre, summary, xmp, article, aside, h1, h2,
h3, h4, h5, h6, hgroup, nav, section, search, table, caption, colgroup, col,
thead, tbody, tfoot, tr, td, th, dir, dd, dl, dt, menu, ol, ul, li, bdi, output,
[dir=ltr i], [dir=rtl i], [dir=auto i] {
unicode-bidi : isolate;
}
bdo, bdo[dir] { unicode-bidi : isolate-override; }
input[dir=auto i]:is([type=search i], [type=tel i], [type=url i],
[type=email i]), textarea[dir=auto i], pre[dir=auto i] {
unicode-bidi : plaintext;
}
/* see prose for input elements whose type attribute is in the Text state */
/* the rules setting the 'content' property on br
and wbr
elements also has bidi implications */
When an input
element's dir
attribute is in the
auto state and its type
attribute is in the Text state, then the user agent is
expected to act as if it had a user-agent-level style sheet rule setting the
'unicode-bidi' property to 'plaintext'.
Input fields (i.e. textarea
elements, and input
elements when their
type
attribute is in the Text, Search,
Telephone, URL,
or Email state) are expected to present an editing
user interface with a directionality that matches the element's 'direction'
property.
When the document's character encoding is ISO-8859-8, the following rules are additionally expected to apply, following those above: [ENCODING]
@namespace "http://www.w3.org/1999/xhtml" ;
address, blockquote, center, div, figure, figcaption, footer, form, header, hr,
legend, listing, main, p, plaintext, pre, summary, xmp, article, aside, h1, h2,
h3, h4, h5, h6, hgroup, nav, section, search, table, caption, colgroup, col,
thead, tbody, tfoot, tr, td, th, dir, dd, dl, dt, menu, ol, ul, li, [dir=ltr i],
[dir=rtl i], [dir=auto i], *|* {
unicode-bidi : bidi-override;
}
input:not([type=submit i]):not([type=reset i]):not([type=button i]),
textarea {
unicode-bidi : normal;
}
@namespace "http://www.w3.org/1999/xhtml" ;
article, aside, h1, h2, h3, h4, h5, h6, hgroup, nav, section {
display : block;
}
h1 { margin-block : 0.67 em ; font-size : 2.00 em ; font-weight : bold; }
h2 { margin-block : 0.83 em ; font-size : 1.50 em ; font-weight : bold; }
h3 { margin-block : 1.00 em ; font-size : 1.17 em ; font-weight : bold; }
h4 { margin-block : 1.33 em ; font-size : 1.00 em ; font-weight : bold; }
h5 { margin-block : 1.67 em ; font-size : 0.83 em ; font-weight : bold; }
h6 { margin-block : 2.33 em ; font-size : 0.67 em ; font-weight : bold; }
In the following CSS block, x is shorthand for the following selector:
:is(article, aside, nav, section)
@namespace "http://www.w3.org/1999/xhtml" ;
x h1 { margin-block : 0.83 em ; font-size : 1.50 em ; }
x x h1 { margin-block : 1.00 em ; font-size : 1.17 em ; }
x x x h1 { margin-block : 1.33 em ; font-size : 1.00 em ; }
x x x x h1 { margin-block : 1.67 em ; font-size : 0.83 em ; }
x x x x x h1 { margin-block : 2.33 em ; font-size : 0.67 em ; }
The shorthand is used to keep this block at least mildly readable.
@namespace "http://www.w3.org/1999/xhtml" ;
dir, dd, dl, dt, menu, ol, ul { display : block; }
li { display : list-item; text-align : match-parent; }
dir, dl, menu, ol, ul { margin-block : 1 em ; }
:is(dir, dl, menu, ol, ul) :is(dir, dl, menu, ol, ul) {
margin-block : 0 ;
}
dd { margin-inline-start : 40 px ; }
dir, menu, ol, ul { padding-inline-start : 40 px ; }
ol, ul, menu { counter-reset : list-item; }
ol { list-style-type : decimal; }
dir, menu, ul {
list-style-type : disc;
}
:is(dir, menu, ol, ul) :is(dir, menu, ul) {
list-style-type : circle;
}
:is(dir, menu, ol, ul) :is(dir, menu, ol, ul) :is(dir, menu, ul) {
list-style-type : square;
}
The following rules are also expected to apply, as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
ol[type="1"], li[type="1"] { list-style-type : decimal; }
ol[type=a s], li[type=a s] { list-style-type : lower-alpha; }
ol[type=A s], li[type=A s] { list-style-type : upper-alpha; }
ol[type=i s], li[type=i s] { list-style-type : lower-roman; }
ol[type=I s], li[type=I s] { list-style-type : upper-roman; }
ul[type=none i], li[type=none i] { list-style-type : none; }
ul[type=disc i], li[type=disc i] { list-style-type : disc; }
ul[type=circle i], li[type=circle i] { list-style-type : circle; }
ul[type=square i], li[type=square i] { list-style-type : square; }
When rendering li
elements, non-CSS user agents are expected to use the
ordinal value of the li
element to render the counter in the list item
marker.
For CSS user agents, some aspects of rendering list items are defined by the CSS Lists specification. Additionally, the following attribute mappings are expected to apply: [CSSLISTS]
When an li
element has a value
attribute, and parsing that attribute's value using the
rules for parsing integers doesn't generate an error, the user agent is expected to
use the parsed value value as a presentational
hint for the 'counter-set' property of the form list-item
value
.
When an ol
element has a start
attribute or a reversed
attribute, or both, the user agent
is expected to use the following steps to treat the attributes as a presentational hint for the 'counter-reset' property:
Let value be null.
If the element has a start
attribute, then set
value to the result of parsing the attribute's value using the rules for
parsing integers.
If the element has a reversed
attribute, then:
If value is an integer, then increment value by 1 and return
reversed(list-item) value
.
Otherwise, return reversed(list-item)
.
Either the start
attribute was absent, or
parsing its value resulted in an error.
Otherwise:
If value is an integer, then decrement value by 1 and return
list-item value
.
Otherwise, there is no presentational hint.
@namespace "http://www.w3.org/1999/xhtml" ;
table { display : table; }
caption { display : table-caption; }
colgroup, colgroup[hidden] { display : table-column-group; }
col, col[hidden] { display : table-column; }
thead, thead[hidden] { display : table-header-group; }
tbody, tbody[hidden] { display : table-row-group; }
tfoot, tfoot[hidden] { display : table-footer-group; }
tr, tr[hidden] { display : table-row; }
td, th { display : table-cell; }
colgroup[hidden], col[hidden], thead[hidden], tbody[hidden],
tfoot[hidden], tr[hidden] {
visibility : collapse;
}
table {
box-sizing : border-box;
border-spacing : 2 px ;
border-collapse : separate;
text-indent : initial;
}
td, th { padding : 1 px ; }
th { font-weight : bold; }
caption { text-align : center; }
thead, tbody, tfoot, table > tr { vertical-align : middle; }
tr, td, th { vertical-align : inherit; }
thead, tbody, tfoot, tr { border-color : inherit; }
table[rules=none i], table[rules=groups i], table[rules=rows i],
table[rules=cols i], table[rules=all i], table[frame=void i],
table[frame=above i], table[frame=below i], table[frame=hsides i],
table[frame=lhs i], table[frame=rhs i], table[frame=vsides i],
table[frame=box i], table[frame=border i],
table[rules=none i] > tr > td, table[rules=none i] > tr > th,
table[rules=groups i] > tr > td, table[rules=groups i] > tr > th,
table[rules=rows i] > tr > td, table[rules=rows i] > tr > th,
table[rules=cols i] > tr > td, table[rules=cols i] > tr > th,
table[rules=all i] > tr > td, table[rules=all i] > tr > th,
table[rules=none i] > thead > tr > td, table[rules=none i] > thead > tr > th,
table[rules=groups i] > thead > tr > td, table[rules=groups i] > thead > tr > th,
table[rules=rows i] > thead > tr > td, table[rules=rows i] > thead > tr > th,
table[rules=cols i] > thead > tr > td, table[rules=cols i] > thead > tr > th,
table[rules=all i] > thead > tr > td, table[rules=all i] > thead > tr > th,
table[rules=none i] > tbody > tr > td, table[rules=none i] > tbody > tr > th,
table[rules=groups i] > tbody > tr > td, table[rules=groups i] > tbody > tr > th,
table[rules=rows i] > tbody > tr > td, table[rules=rows i] > tbody > tr > th,
table[rules=cols i] > tbody > tr > td, table[rules=cols i] > tbody > tr > th,
table[rules=all i] > tbody > tr > td, table[rules=all i] > tbody > tr > th,
table[rules=none i] > tfoot > tr > td, table[rules=none i] > tfoot > tr > th,
table[rules=groups i] > tfoot > tr > td, table[rules=groups i] > tfoot > tr > th,
table[rules=rows i] > tfoot > tr > td, table[rules=rows i] > tfoot > tr > th,
table[rules=cols i] > tfoot > tr > td, table[rules=cols i] > tfoot > tr > th,
table[rules=all i] > tfoot > tr > td, table[rules=all i] > tfoot > tr > th {
border-color : black;
}
The following rules are also expected to apply, as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
table[align=left i] { float : left; }
table[align=right i] { float : right; }
table[align=center i] { margin-inline : auto; }
thead[align=absmiddle i], tbody[align=absmiddle i], tfoot[align=absmiddle i],
tr[align=absmiddle i], td[align=absmiddle i], th[align=absmiddle i] {
text-align : center;
}
caption[align=bottom i] { caption-side : bottom; }
p[align=left i], h1[align=left i], h2[align=left i], h3[align=left i],
h4[align=left i], h5[align=left i], h6[align=left i] {
text-align : left;
}
p[align=right i], h1[align=right i], h2[align=right i], h3[align=right i],
h4[align=right i], h5[align=right i], h6[align=right i] {
text-align : right;
}
p[align=center i], h1[align=center i], h2[align=center i], h3[align=center i],
h4[align=center i], h5[align=center i], h6[align=center i] {
text-align : center;
}
p[align=justify i], h1[align=justify i], h2[align=justify i], h3[align=justify i],
h4[align=justify i], h5[align=justify i], h6[align=justify i] {
text-align : justify;
}
thead[valign=top i], tbody[valign=top i], tfoot[valign=top i],
tr[valign=top i], td[valign=top i], th[valign=top i] {
vertical-align : top;
}
thead[valign=middle i], tbody[valign=middle i], tfoot[valign=middle i],
tr[valign=middle i], td[valign=middle i], th[valign=middle i] {
vertical-align : middle;
}
thead[valign=bottom i], tbody[valign=bottom i], tfoot[valign=bottom i],
tr[valign=bottom i], td[valign=bottom i], th[valign=bottom i] {
vertical-align : bottom;
}
thead[valign=baseline i], tbody[valign=baseline i], tfoot[valign=baseline i],
tr[valign=baseline i], td[valign=baseline i], th[valign=baseline i] {
vertical-align : baseline;
}
td[nowrap], th[nowrap] { white-space : nowrap; }
table[rules=none i], table[rules=groups i], table[rules=rows i],
table[rules=cols i], table[rules=all i] {
border-style : hidden;
border-collapse : collapse;
}
table[border] { border-style : outset; } /* only if border is not equivalent to zero */
table[frame=void i] { border-style : hidden; }
table[frame=above i] { border-style : outset hidden hidden hidden; }
table[frame=below i] { border-style : hidden hidden outset hidden; }
table[frame=hsides i] { border-style : outset hidden outset hidden; }
table[frame=lhs i] { border-style : hidden hidden hidden outset; }
table[frame=rhs i] { border-style : hidden outset hidden hidden; }
table[frame=vsides i] { border-style : hidden outset; }
table[frame=box i], table[frame=border i] { border-style : outset; }
table[border] > tr > td, table[border] > tr > th,
table[border] > thead > tr > td, table[border] > thead > tr > th,
table[border] > tbody > tr > td, table[border] > tbody > tr > th,
table[border] > tfoot > tr > td, table[border] > tfoot > tr > th {
/* only if border is not equivalent to zero */
border-width : 1 px ;
border-style : inset;
}
table[rules=none i] > tr > td, table[rules=none i] > tr > th,
table[rules=none i] > thead > tr > td, table[rules=none i] > thead > tr > th,
table[rules=none i] > tbody > tr > td, table[rules=none i] > tbody > tr > th,
table[rules=none i] > tfoot > tr > td, table[rules=none i] > tfoot > tr > th,
table[rules=groups i] > tr > td, table[rules=groups i] > tr > th,
table[rules=groups i] > thead > tr > td, table[rules=groups i] > thead > tr > th,
table[rules=groups i] > tbody > tr > td, table[rules=groups i] > tbody > tr > th,
table[rules=groups i] > tfoot > tr > td, table[rules=groups i] > tfoot > tr > th,
table[rules=rows i] > tr > td, table[rules=rows i] > tr > th,
table[rules=rows i] > thead > tr > td, table[rules=rows i] > thead > tr > th,
table[rules=rows i] > tbody > tr > td, table[rules=rows i] > tbody > tr > th,
table[rules=rows i] > tfoot > tr > td, table[rules=rows i] > tfoot > tr > th {
border-width : 1 px ;
border-style : none;
}
table[rules=cols i] > tr > td, table[rules=cols i] > tr > th,
table[rules=cols i] > thead > tr > td, table[rules=cols i] > thead > tr > th,
table[rules=cols i] > tbody > tr > td, table[rules=cols i] > tbody > tr > th,
table[rules=cols i] > tfoot > tr > td, table[rules=cols i] > tfoot > tr > th {
border-width : 1 px ;
border-block-style : none;
border-inline-style : solid;
}
table[rules=all i] > tr > td, table[rules=all i] > tr > th,
table[rules=all i] > thead > tr > td, table[rules=all i] > thead > tr > th,
table[rules=all i] > tbody > tr > td, table[rules=all i] > tbody > tr > th,
table[rules=all i] > tfoot > tr > td, table[rules=all i] > tfoot > tr > th {
border-width : 1 px ;
border-style : solid;
}
table[rules=groups i] > colgroup {
border-inline-width : 1 px ;
border-inline-style : solid;
}
table[rules=groups i] > thead,
table[rules=groups i] > tbody,
table[rules=groups i] > tfoot {
border-block-width : 1 px ;
border-block-style : solid;
}
table[rules=rows i] > tr, table[rules=rows i] > thead > tr,
table[rules=rows i] > tbody > tr, table[rules=rows i] > tfoot > tr {
border-block-width : 1 px ;
border-block-style : solid;
}
In quirks mode, the following rules are also expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
table {
font-weight : initial;
font-style : initial;
font-variant : initial;
font-size : initial;
line-height : initial;
white-space : initial;
text-align : initial;
}
For the purposes of the CSS table model, the col
element is expected to be treated
as if it was present as many times as its span
attribute specifies.
For the purposes of the CSS table model, the colgroup
element, if it contains no
col
element, is expected to be treated as if it had as many such children as its
span
attribute specifies.
For the purposes of the CSS table model, the colspan
and
rowspan
attributes on td
and th
elements are expected to provide the
special knowledge regarding cells spanning rows and columns.
In HTML documents, the following rules are also expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
:is(table, thead, tbody, tfoot, tr) > form { display : none !important; }
The table
element's cellspacing
attribute maps to the pixel length property 'border-spacing' on the
element.
The table
element's cellpadding
attribute maps to the pixel length
properties 'padding-top', 'padding-right',
'padding-bottom', and 'padding-left' of any td
and
th
elements that have corresponding cells in the
table corresponding to the table
element.
The table
element's height
attribute
maps to the dimension property 'height' on the table
element.
The table
element's width
attribute
maps to the dimension property (ignoring zero) 'width' on the
table
element.
The col
element's width
attribute maps
to the dimension property 'width' on the col
element.
The thead
, tbody
, and tfoot
elements' height
attribute maps to the dimension property
'height' on the element.
The tr
element's height
attribute maps
to the dimension property 'height' on the tr
element.
The td
and th
elements' height
attributes map to the dimension
property (ignoring zero) 'height' on the element.
The td
and th
elements' width
attributes map to the dimension
property (ignoring zero) 'width' on the element.
The thead
, tbody
, tfoot
, tr
,
td
, and th
elements, when they have an align
attribute whose value is an ASCII case-insensitive match for either the string "center
" or the string "middle
", are expected to center
text within themselves, as if they had their 'text-align' property set to 'center' in
a presentational hint, and to align
descendants to the center.
The thead
, tbody
, tfoot
, tr
,
td
, and th
elements, when they have an align
attribute whose value is an ASCII case-insensitive match for the string "left
", are expected to left-align text within themselves, as if they had their
'text-align' property set to 'left' in a presentational hint, and to align descendants to the left.
The thead
, tbody
, tfoot
, tr
,
td
, and th
elements, when they have an align
attribute whose value is an ASCII case-insensitive match for the string "right
", are expected to right-align text within themselves, as if they had their
'text-align' property set to 'right' in a presentational hint, and to align descendants to the right.
The thead
, tbody
, tfoot
, tr
,
td
, and th
elements, when they have an align
attribute whose value is an ASCII case-insensitive match for the string "justify
", are expected to full-justify text within themselves, as if they had
their 'text-align' property set to 'justify' in a presentational hint, and to align descendants to the left.
User agents are expected to have a rule in their user agent style sheet that matches
th
elements that have a parent node whose computed value for the
'text-align' property is its initial value, whose declaration block consists of just
a single declaration that sets the 'text-align' property to the value 'center'.
When a table
, thead
, tbody
, tfoot
,
tr
, td
, or th
element has a background
attribute set to a non-empty value, the new value is
expected to be encoding-parsed-and-serialized relative to the element's node document,
and if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the element's
'background-image' property to the return value.
When a table
, thead
, tbody
, tfoot
,
tr
, td
, or th
element has a bgcolor
attribute set, the new value is expected to be parsed using the rules for parsing a legacy
color value, and if that does not return failure, the user agent is expected to treat the
attribute as a presentational hint setting the element's
'background-color' property to the resulting color.
When a table
element has a bordercolor
attribute, its value is expected to be parsed using the rules for parsing a legacy color
value, and if that does not return failure, the user agent is expected to treat the
attribute as a presentational hint setting the
element's 'border-top-color', 'border-right-color',
'border-bottom-color', and 'border-left-color' properties to the
resulting color.
The table
element's border
attribute maps to the pixel length properties
'border-top-width', 'border-right-width',
'border-bottom-width', 'border-left-width' on the element. If the
attribute is present but parsing the attribute's value using the rules for parsing
non-negative integers generates an error, a default value of 1px is expected to be used for
that property instead.
Rules marked "only if border is not equivalent to zero"
in the CSS block above is expected to only be applied if the border
attribute mentioned in the selectors for the rule is not
only present but, when parsed using the rules for parsing non-negative integers, is
also found to have a value other than zero or to generate an error.
In quirks mode, a td
element or a th
element that has a
nowrap
attribute but also has a width
attribute whose value, when parsed using the rules for
parsing nonzero dimension values, is found to be a length (not an error or a number
classified as a percentage), is expected to have a presentational hint setting the element's 'white-space' property to
'normal', overriding the rule in the CSS block above that sets it to 'nowrap'.
A node is substantial if it is a text node that is not inter-element whitespace, or if it is an element node.
A node is blank if it is an element that contains no substantial nodes.
The elements with default margins
are the following elements: blockquote
, dir
, dl
,
h1
, h2
, h3
, h4
, h5
,
h6
, listing
, menu
, ol
,
p
, plaintext
, pre
, ul
, xmp
In quirks mode, any element
with default margins that is the child of a
body
, td
, or th
element and has no substantial previous siblings is expected to have a
user-agent level style sheet rule that sets its 'margin-block-start' property to
zero.
In quirks mode, any element
with default margins that is the child of a
body
, td
, or th
element, has no substantial previous siblings, and is blank, is expected to have a user-agent level style sheet
rule that sets its 'margin-block-end' property to zero also.
In quirks mode, any element
with default margins that is the child of a
td
or th
element, has no substantial following siblings, and is blank, is expected to have a user-agent level style sheet
rule that sets its 'margin-block-start' property to zero.
In quirks mode, any p
element that is the child of a td
or th
element and has
no substantial following siblings, is expected
to have a user-agent level style sheet rule that sets its 'margin-block-end' property
to zero.
@namespace "http://www.w3.org/1999/xhtml" ;
input, select, button, textarea {
letter-spacing : initial;
word-spacing : initial;
line-height : initial;
text-transform : initial;
text-indent : initial;
text-shadow : initial;
appearance : auto;
}
input:not([type=image i], [type=range i], [type=checkbox i], [type=radio i]) {
overflow : clip !important;
overflow-clip-margin: 0 !important;
}
input, select, textarea {
text-align: initial;
}
:autofill {
field-sizing: fixed !important;
}
input:is([type=reset i], [type=button i], [type=submit i]), button {
text-align: center;
}
input, button {
display: inline-block;
}
input[type=hidden i], input[type=file i], input[type=image i] {
appearance: none;
}
input:is([type=radio i], [type=checkbox i], [type=reset i], [type=button i],
[type=submit i], [type=color i], [type=search i]), select, button {
box-sizing: border-box;
}
textarea { white-space: pre-wrap; }
In quirks mode, the following rules are also expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
input:not([type=image i]), textarea { box-sizing : border-box; }
Each kind of form control is also described in the Widgets section, which describes the look and feel of the control.
For input
elements where the type
attribute
is not in the state or the Image Button state, and that are being
rendered, are expected to act as follows:
The inner display type is always 'flow-root'.
hr
element@namespace "http://www.w3.org/1999/xhtml" ;
hr {
color : gray;
border-style : inset;
border-width : 1 px ;
margin-block : 0.5 em ;
margin-inline : auto;
overflow : hidden;
}
The following rules are also expected to apply, as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
hr[align=left i] { margin-left : 0 ; margin-right : auto; }
hr[align=right i] { margin-left : auto; margin-right : 0 ; }
hr[align=center i] { margin-left : auto; margin-right : auto; }
hr[color], hr[noshade] { border-style : solid; }
If an hr
element has either a color
attribute
or a noshade
attribute, and furthermore also has a size
attribute, and parsing that attribute's value using the
rules for parsing non-negative integers doesn't generate an error, then the user
agent is expected to use the parsed value divided by two as a pixel length for
presentational hints for the properties 'border-top-width',
'border-right-width', 'border-bottom-width', and
'border-left-width' on the element.
Otherwise, if an hr
element has neither a color
attribute nor a noshade
attribute, but does have a size
attribute, and parsing that attribute's value using the
rules for parsing non-negative integers doesn't generate an error, then: if the
parsed value is one, then the user agent is expected to use the attribute as a presentational hint setting the element's
'border-bottom-width' to 0; otherwise, if the parsed value is greater than one, then
the user agent is expected to use the parsed value minus two as a pixel length for
presentational hints for the 'height' property on the element.
The width
attribute on an hr
element maps
to the dimension property 'width' on the element.
When an hr
element has a color
attribute, its
value is expected to be parsed using the rules for parsing a legacy color value, and
if that does not return failure, the user agent is expected to treat the attribute as a presentational hint setting the element's
'color' property to the resulting color.
fieldset
and legend
elements@namespace "http://www.w3.org/1999/xhtml" ;
fieldset {
display : block;
margin-inline : 2 px ;
border : groove 2 px ThreeDFace;
padding-block : 0.35 em 0.625 em ;
padding-inline : 0.75 em ;
min-inline-size : min-content;
}
legend {
padding-inline : 2 px ;
}
legend[align=left i] {
justify-self : left;
}
legend[align=center i] {
justify-self : center;
}
legend[align=right i] {
justify-self : right;
}
The fieldset
element, when it generates a CSS box, is expected to act
as follows:
The element is expected to establish a new block formatting context.
The 'display' property is expected to act as follows:
If the computed value of 'display' is a value such that the outer display type is 'inline', then behave as 'inline-block'.
Otherwise, behave as 'flow-root'.
This does not change the computed value.
If the element's box has a child box that matches the conditions in the list below, then the first such child box is the 'fieldset' element's rendered legend:
legend
element.If the element has a rendered legend, then the border is expected to not be painted behind the rectangle defined as follows, using the writing mode of the fieldset:
The block-start edge of the rectangle is the smaller of the block-start edge of the
rendered legend's margin rectangle at its static position (ignoring transforms),
and the block-start outer edge of the fieldset
's border.
The block-end edge of the rectangle is the larger of the block-end edge of the
rendered legend's margin rectangle at its static position (ignoring transforms),
and the block-end outer edge of the fieldset
's border.
The inline-start edge of the rectangle is the smaller of the inline-start edge of the
rendered legend's border rectangle at its static position (ignoring transforms),
and the inline-start outer edge of the fieldset
's border.
The inline-end edge of the rectangle is the larger of the inline-end edge of the
rendered legend's border rectangle at its static position (ignoring transforms),
and the inline-end outer edge of the fieldset
's border.
The space allocated for the element's border on the block-start side is expected to be
the element's 'border-block-start-width' or the rendered legend's
margin box size in the fieldset
's block-flow direction, whichever is
greater.
For the purpose of calculating the used 'block-size', if the computed 'block-size' is not 'auto', the space allocated for the rendered legend's margin box that spills out past the border, if any, is expected to be subtracted from the 'block-size'. If the content box's block-size would be negative, then let the content box's block-size be zero instead.
If the element has a rendered legend, then that element is expected to be the first child box.
The anonymous fieldset content box is expected to appear after the
rendered legend and is expected to contain the content (including the '::before'
and '::after' pseudo-elements) of the fieldset
element except for the
rendered legend, if there is one.
The used value of the 'padding-top', 'padding-right', 'padding-bottom', and 'padding-left' properties are expected to be zero.
For the purpose of calculating the min-content inline size, use the greater of the min-content inline size of the rendered legend and the min-content inline size of the anonymous fieldset content box.
For the purpose of calculating the max-content inline size, use the greater of the max-content inline size of the rendered legend and the max-content inline size of the anonymous fieldset content box.
A fieldset
element's rendered legend, if any, is expected to act as
follows:
The element is expected to establish a new formatting context for its contents. The type of this formatting context is determined by its 'display' value, as usual.
The 'display' property is expected to behave as if its computed value was blockified.
This does not change the computed value.
If the computed value of 'inline-size' is 'auto', then the used value is the fit-content inline size.
The element is expected to be positioned in the inline direction as is normal for blocks (e.g., taking into account margins and the 'justify-self' property).
The element's box is expected to be constrained in the inline direction by the inline
content size of the fieldset
as if it had used its computed inline padding.
For example, if the fieldset
has a specified padding of 50px, then the
rendered legend will be positioned 50px in from the fieldset
's
border. The padding will further apply to the anonymous fieldset content box
instead of the fieldset
element itself.
The element is expected to be positioned in the block-flow direction such that its border
box is centered over the border on the block-start side of the fieldset
element.
A fieldset
element's anonymous fieldset content box is expected to
act as follows:
The 'display' property is expected to act as follows:
The following properties are expected to inherit from the fieldset
element:
The 'block-size' property is expected to be set to '100%'.
For the purpose of calculating percentage padding, act as if the padding was calculated
for the fieldset
element.
The following elements can be replaced
elements: audio
, canvas
, embed
, iframe
,
img
, input
, object
, and video
.
The embed
, iframe
, and video
elements are expected to be
treated as replaced elements.
A canvas
element that represents embedded content is
expected to be treated as a replaced element; the contents of such elements are the
element's bitmap, if any, or else a transparent black bitmap with the same
natural dimensions as the element. Other canvas
elements are expected
to be treated as ordinary elements in the rendering model.
An object
element that represents an image, plugin, or its
content navigable is expected to be treated as a replaced element.
Other object
elements are expected to be treated as ordinary elements in the
rendering model.
The audio
element, when it is exposing a user interface, is expected to be treated as a
replaced element about one line high, as wide as is necessary to expose the user
agent's user interface features. When an audio
element is not exposing a user interface, the user agent is expected to force
its 'display' property to compute to 'none', irrespective of CSS rules.
Whether a video
element is exposing a user interface is not expected to affect the size of the rendering;
controls are expected to be overlaid above the page content without causing any layout changes,
and are expected to disappear when the user does not need them.
When a video
element represents a poster frame or frame of video, the poster frame
or frame of video is expected to be rendered at the largest size that maintains the aspect ratio
of that poster frame or frame of video without being taller or wider than the video
element itself, and is expected to be centered in the video
element.
Any subtitles or captions are expected to be overlaid directly on top of their
video
element, as defined by the relevant rendering rules; for WebVTT, those are the
rules for updating the display of WebVTT text tracks. [WEBVTT]
When the user agent starts exposing a user
interface for a video
element, the user agent should run the rules for
updating the text track rendering of each of the text
tracks in the video
element's list of text tracks that are showing and whose text track kind is one of subtitles
or captions
(e.g., for text
tracks based on WebVTT, the rules for updating the display of WebVTT text
tracks). [WEBVTT]
Resizing video
and canvas
elements does not interrupt
video playback or clear the canvas.
The following CSS rules are expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
iframe { border : 2 px inset; }
video { object-fit : contain; }
User agents are expected to render img
elements and input
elements
whose type
attributes are in the Image Button state, according to the first applicable rules
from the following list:
alt
attribute, or
Document
is in quirks mode, and the element already has
natural dimensions (e.g., from the dimension attributes or CSS
rules)
input
elements, the element
is expected to appear button-like to indicate that the element is a button.img
element that represents some text and the
user agent does not expect this to changeimg
element that represents nothing and the
user agent does not expect this to changeinput
element that does not represent an image and the user agent does not expect this to changeThe icons mentioned above are expected to be relatively small so as not to disrupt most text but be easily clickable. In a visual environment, for instance, icons could be 16 pixels by 16 pixels square, or 1em by 1em if the images are scalable. In an audio environment, the icon could be a short bleep. The icons are intended to indicate to the user that they can be used to get to whatever options the UA provides for images, and, where appropriate, are expected to provide access to the context menu that would have come up if the user interacted with the actual image.
All animated images with the same absolute URL and the same image data are expected to be rendered synchronized to the same timeline as a group, with the timeline starting at the time of the least recent addition to the group.
In other words, when a second image with the same absolute URL and animated image data is inserted into a document, it jumps to the point in the animation cycle that is currently being displayed by the first image.
When a user agent is to restart the animation for an img
element
showing an animated image, all animated images with the same absolute URL and the
same image data in that img
element's node document are expected to restart
their animation from the beginning.
The following CSS rules are expected to apply:
@namespace "http://www.w3.org/1999/xhtml" ;
img:is([sizes="auto" i], [sizes^="auto," i]) {
contain : size !important;
contain-intrinsic-size: 300px 150px;
}
The following CSS rules are expected to apply when the Document
is in quirks
mode:
@namespace "http://www.w3.org/1999/xhtml" ;
img[align=left i] { margin-right : 3 px ; }
img[align=right i] { margin-left : 3 px ; }
The following CSS rules are expected to apply as presentational hints:
@namespace "http://www.w3.org/1999/xhtml" ;
iframe[frameborder='0'], iframe[frameborder=no i] { border : none; }
embed[align=left i], iframe[align=left i], img[align=left i],
input[type=image i][align=left i], object[align=left i] {
float : left;
}
embed[align=right i], iframe[align=right i], img[align=right i],
input[type=image i][align=right i], object[align=right i] {
float : right;
}
embed[align=top i], iframe[align=top i], img[align=top i],
input[type=image i][align=top i], object[align=top i] {
vertical-align : top;
}
embed[align=baseline i], iframe[align=baseline i], img[align=baseline i],
input[type=image i][align=baseline i], object[align=baseline i] {
vertical-align : baseline;
}
embed[align=texttop i], iframe[align=texttop i], img[align=texttop i],
input[type=image i][align=texttop i], object[align=texttop i] {
vertical-align : text-top;
}
embed[align=absmiddle i], iframe[align=absmiddle i], img[align=absmiddle i],
input[type=image i][align=absmiddle i], object[align=absmiddle i],
embed[align=abscenter i], iframe[align=abscenter i], img[align=abscenter i],
input[type=image i][align=abscenter i], object[align=abscenter i] {
vertical-align : middle;
}
embed[align=bottom i], iframe[align=bottom i], img[align=bottom i],
input[type=image i][align=bottom i], object[align=bottom i] {
vertical-align : bottom;
}
When an embed
, iframe
, img
, or object
element, or an input
element whose type
attribute is in the Image Button state, has an align
attribute whose value is an ASCII case-insensitive match for
the string "center
" or the string "middle
", the user
agent is expected to act as if the element's 'vertical-align' property was set to a
value that aligns the vertical middle of the element with the parent element's baseline.
The hspace
attribute of embed
,
img
, or object
elements, and input
elements with a type
attribute in the Image
Button state, maps to the dimension
properties 'margin-left' and 'margin-right' on the element.
The vspace
attribute of embed
,
img
, or object
elements, and input
elements with a type
attribute in the Image
Button state, maps to the dimension
properties 'margin-top' and 'margin-bottom' on the element.
When an img
element, object
element, or input
element
with a type
attribute in the Image Button state has a border
attribute whose value, when parsed using the rules for
parsing non-negative integers, is found to be a number greater than zero, the user agent is
expected to use the parsed value for eight presentational hints: four setting the
parsed value as a pixel length for the element's 'border-top-width',
'border-right-width', 'border-bottom-width', and
'border-left-width' properties, and four setting the element's
'border-top-style', 'border-right-style',
'border-bottom-style', and 'border-left-style' properties to the value
'solid'.
The width
and height
attributes on an img
element's dimension attribute source map to the dimension properties
'width' and 'height' on the img
element respectively. They
similarly map to the aspect-ratio property (using dimension rules) of the
img
element.
The width
and height
attributes on embed
, iframe
, object
, and video
elements, and input
elements with a type
attribute in the Image Button state and that either
represents an image or that the user expects will eventually represent an image, map to the dimension properties
'width' and 'height' on the element respectively.
The width
and height
attributes map to the aspect-ratio property (using dimension rules) on
img
and video
elements, and input
elements with a type
attribute in the Image
Button state.
The width
and height
attributes map to the aspect-ratio property
on canvas
elements.
Shapes on an image map are expected to act, for the purpose of the CSS cascade, as
elements independent of the original area
element that happen to match the same style
rules but inherit from the img
or object
element.
For the purposes of the rendering, only the 'cursor' property is expected to have any effect on the shape.
Thus, for example, if an area
element has a style
attribute that sets the 'cursor' property to 'help',
then when the user designates that shape, the cursor would change to a Help cursor.
Similarly, if an area
element had a CSS rule that set its
'cursor' property to 'inherit' (or if no rule setting the 'cursor'
property matched the element at all), the shape's cursor would be inherited from the
img
or object
element of the image map, not from the parent
of the area
element.
The CSS Basic User Interface specification calls elements that can have a native appearance widgets, and defines whether to use that native appearance depending on the 'appearance' property. That logic, in turn, depends on whether on whether each the element is classified as a devolvable widget or non-devolvable widget. This section defines which elements match these concepts for HTML, what their native appearance is, and any particularity of their devolved state or primitive appearance. [CSSUI]
The following elements can have a native appearance for the purpose of the CSS 'appearance' property.
Several widgets have their rendering controlled by the 'writing-mode' CSS property. For the purposes of those widgets, we have the following definitions.
A horizontal writing mode is when resolving the 'writing-mode' property of the control results in a computed value of 'horizontal-tb'.
A vertical writing mode is when resolving the 'writing-mode' property of the control results in a computed value of either 'vertical-rl', 'vertical-lr', 'sideways-rl' or 'sideways-lr'.
When an element uses button layout, it is a devolvable widget, and it's native appearance is that of a button.
Button layout is as follows:
If the element is a button
element, then the 'display' property is
expected to act as follows:
If the computed value of 'display' is 'inline-grid', 'grid', 'inline-flex', 'flex', 'none', or 'contents', then behave as the computed value.
Otherwise, if the computed value of 'display' is a value such that the outer display type is 'inline', then behave as 'inline-block'.
Otherwise, behave as 'flow-root'.
The element is expected to establish a new formatting context for its contents. The type of this formatting context is determined by its 'display' value, as usual.
If the element is absolutely-positioned, then for the purpose of the CSS visual formatting model, act as if the element is a replaced element. [CSS]
If the computed value of 'inline-size' is 'auto', then the used value is the fit-content inline size.
For the purpose of the 'normal' keyword of the 'align-self' property, act as if the element is a replaced element.
If the element is an input
element, or if it is a button
element
and its computed value for 'display' is not 'inline-grid', 'grid', 'inline-flex',
or 'flex', then the element's box has a child anonymous button content box with the
following behaviors:
The box is a block-level block container that establishes a new block formatting context (i.e., 'display' is 'flow-root').
If the box does not overflow in the horizontal axis, then it is centered horizontally.
If the box does not overflow in the vertical axis, then it is centered vertically.
Otherwise, there is no anonymous button content box.
Need to define the expected primitive appearance.
button
elementThe button
element, when it generates a CSS box, is expected to
depict a button and to use button layout whose anonymous button content
box's contents (if there is an anonymous button content box) are the child
boxes the element's box would otherwise have.
details
and summary
elements@namespace "http://www.w3.org/1999/xhtml" ;
details, summary {
display : block;
}
details > summary:first-of-type {
display : list-item;
counter-increment : list-item 0 ;
list-style : disclosure-closed inside;
}
details[open] > summary:first-of-type {
list-style-type : disclosure-open;
}
The details
element is expected to have an internal shadow tree with
three child elements:
The first child element is a slot
that is expected to take the
details
element's first summary
element child, if any. This element
has a single child summary
element called the default summary which has
text content that is implementation-defined (and probably locale-specific).
The summary
element that this slot represents is expected to allow
the user to request the details be shown or hidden.
The second child element is a slot
that is expected to take the
details
element's remaining descendants, if any. This element has no contents.
This element is expected to match the '::details-content' pseudo-element.
This element is expected to have its style
attribute set to
"display: block; content-visibility: hidden;
" when the
details
element does not have an open
attribute. When it does have the open
attribute, the
style
attribute is expected to be set to
"display: block;
".
Because the slots are hidden inside a shadow tree, this style
attribute is not directly visible to author code. Its impacts,
however, are visible. Notably, the choice of content-visibility: hidden
instead of, e.g., display: none
, impacts the results of various APIs that
query layout information.
The third child element is either a link
or style
element with the following styles for the default summary:
:host summary {
display : list-item;
counter-increment : list-item 0 ;
list-style : disclosure-closed inside;
}
:host([open]) summary {
list-style-type : disclosure-open;
}
The position of this child element relative to the other two is not observable. This means that implementations might have it in a different order relative to its siblings. Implementations might even associate the style with the shadow tree using a mechanism that is not an element.
The structure of this shadow tree is observable through the ways that the children
of the details
element and the '::details-content' pseudo-element respond to CSS
styles.
input
element as a text entry widgetAn input
element whose type
attribute is in
the Text, Telephone, URL, or
Email state, is a devolvable widget. Its
expected native appearance is to render as an 'inline-block' box depicting
a one-line text control.
An input
element whose type
attribute is in
the Search state is a devolvable widget.
Its expected native appearance is to render as an 'inline-block' box
depicting a one-line text control. If the computed value of the element's
'appearance' property is not 'textfield'
, it may have a distinct style
indicating that it is a search field.
An input
element whose type
attribute is in
the Password state is a devolvable
widget. Its expected native appearance is to render as an
'inline-block' box depicting a one-line text control that obscures data entry.
For input
elements whose type
attribute is
in one of the above states, the used value of the 'line-height' property
must be a length value that is no smaller than what the used value would be for
'line-height: normal'.
The used value will not be the actual keyword 'normal'. Also, this rule does not affect the computed value.
If these text controls provide a text selection, then, when the user changes the current
selection, the user agent is expected to queue an element task on the user
interaction task source given the input
element to fire an event named select
at the element, with the bubbles
attribute initialized to
true.
An input
element whose type
attribute is
in one of the above states is an element with default preferred size, and user
agents are expected to apply the 'field-sizing' CSS property to the element. User
agents are expected to determine the inline size of its intrinsic size
by the following steps:
If the 'field-sizing' property on the element has a computed value
of 'content', the inline size is
determined by the text which the element shows. The text is either a
value or a short hint specified by the
placeholder
attribute. User agents may take the
text caret size into account in the inline size.
If the element has a size
attribute, and parsing that
attribute's value using the rules for parsing non-negative integers doesn't
generate an error, return the value obtained from applying the converting a character
width to pixels algorithm to the value of the attribute.
Otherwise, return the value obtained from applying the converting a character width to pixels algorithm to the number 20.
The converting a character width to pixels algorithm returns (size-1)×avg + max, where size is the character width to convert, avg is the average character width of the primary font for the element for which the algorithm is being run, in pixels, and max is the maximum character width of that same font, also in pixels. (The element's 'letter-spacing' property does not affect the result.)
These text controls are expected to be scroll containers and support scrolling in the inline axis, but not the block axis.
Need to detail the expected native appearance and primitive appearance.
input
element as domain-specific widgetsAn input
element whose type
attribute is in
the Date state is a devolvable widget
expected to render as an 'inline-block' box depicting a date control.
An input
element whose type
attribute is in
the Month state is a devolvable widget
expected to render as an 'inline-block' box depicting a month control.
An input
element whose type
attribute is in
the Week state is a devolvable widget
expected to render as an 'inline-block' box depicting a week control.
An input
element whose type
attribute is in
the Time state is a devolvable widget
expected to render as an 'inline-block' box depicting a time control.
An input
element whose type
attribute is in
the Local Date and Time state is a
devolvable widget expected to render as an 'inline-block' box depicting
a local date and time control.
An input
element whose type
attribute is in
the Number state is a devolvable widget
expected to render as an 'inline-block' box depicting a number control.
An input
element whose type
attribute is in
the Number state is an
element with default preferred size, and user agents are expected to apply the
'field-sizing' CSS property to the element. The block size of the
intrinsic size is about one line high. If the 'field-sizing' property
on the element has a computed value of
'content', the inline size of the
intrinsic size is expected to be about as wide as necessary to show the current
value. Otherwise, the inline size of the
intrinsic size is expected to be about as wide as necessary to show the widest
possible value.
An input
element whose type
attribute is in
the Date,
Month,
Week, Time,
or Local Date and Time state, is expected to
be about one line high, and about as wide as necessary to show the widest possible value.
Need to detail the expected native appearance and primitive appearance.
input
element as a range controlAn input
element whose type
attribute is in
the Range state is a non-devolvable
widget. Its expected native appearance is to render as an
'inline-block' box depicting a slider control.
When this control has a horizontal writing mode, the control is expected to be a horizontal slider. Its lowest value is on the right if the 'direction' property has a computed value of 'rtl', and on the left otherwise. When this control has a vertical writing mode, it is expected to be a vertical slider. Its lowest value is on the bottom if the 'direction' property has a computed value of 'rtl', and on the top otherwise.
Predefined suggested values (provided by the list
attribute) are expected to be shown as tick marks on the slider, which the slider can snap to.
Need to detail the expected primitive appearance.
input
element as a color
wellAn input
element whose type
attribute is in
the Color state is expected to depict a color well,
which, when activated, provides the user with a color picker (e.g. a color wheel or color
palette) from which the color can be changed. The element, when it generates a CSS
box, is expected to use button layout, that has no child boxes of the
anonymous button content box. The anonymous button content box is
expected to have a presentational hint setting the
'background-color' property to the element's value.
Predefined suggested values (provided by the list
attribute) are expected to be shown in the color picker interface, not on the color well
itself.
Need to detail the expected native appearance and primitive appearance.
input
element as a checkbox and radio button widgetsAn input
element whose type
attribute is in
the Checkbox state is a non-devolvable
widget expected to render as an 'inline-block' box containing a single
checkbox control, with no label.
Need to detail the expected native appearance and primitive appearance.
An input
element whose type
attribute is in
the Radio Button state is a non-devolvable
widget expected to render as an 'inline-block' box containing a single radio
button control, with no label.
Need to detail the expected native appearance and primitive appearance.
input
element as a file upload controlAn input
element whose type
attribute is in
the File Upload state, when it generates a CSS
box, is expected to render as an 'inline-block' box containing a span of text
giving the filename(s) of the selected
files, if any, followed by a button that, when activated, provides the user with a file
picker from which the selection can be changed. The button is expected to use button
layout and match the '::file-selector-button' pseudo-element. The contents of
its anonymous button content box are expected to be
implementation-defined (and possibly locale-specific) text, for example "Choose
file".
User agents may handle an input
element whose
type
attribute is in the
File Upload state as an
element with default preferred size, and user agents may apply the
'field-sizing' CSS property to the element. If the 'field-sizing'
property on the element has a computed value of
'content', the intrinsic size of the
element is expected to depend on its content such as the '::file-selector-button'
pseudo-element and chosen file names.
input
element as a buttonAn input
element whose type
attribute is in
the Submit Button, Reset Button, or Button state, when it generates a CSS box, is
expected to depict a button and use button layout and the contents of the
anonymous button content box are expected to be the text of the element's value
attribute, if any, or text derived from the element's type
attribute in an implementation-defined (and
probably locale-specific) fashion, if not.
marquee
element@namespace "http://www.w3.org/1999/xhtml" ;
marquee {
display : inline-block;
text-align : initial;
overflow : hidden !important;
}
The marquee
element, while turned on, is
expected to render in an animated fashion according to its attributes as follows:
behavior
attribute is in the
scroll stateSlide the contents of the element in the direction described by the direction
attribute as defined below, such that it begins
off the start side of the marquee
, and ends flush with the inner end side.
For example, if the direction
attribute is left (the default), then the
contents would start such that their left edge are off the side of the right edge of the
marquee
's content area, and the contents would then slide up to the
point where the left edge of the contents are flush with the left inner edge of the
marquee
's content area.
Once the animation has ended, the user agent is expected to increment the marquee current loop index. If the element is still turned on after this, then the user agent is expected to restart the animation.
behavior
attribute is in the
slide stateSlide the contents of the element in the direction described by the direction
attribute as defined below, such that it begins
off the start side of the marquee
, and ends off the end side of the
marquee
.
For example, if the direction
attribute is left (the default), then the
contents would start such that their left edge are off the side of the right edge of the
marquee
's content area, and the contents would then slide up to the
point where the right edge of the contents are flush with the left inner edge of the
marquee
's content area.
Once the animation has ended, the user agent is expected to increment the marquee current loop index. If the element is still turned on after this, then the user agent is expected to restart the animation.
behavior
attribute is in the
alternate stateWhen the marquee current loop index is even (or zero), slide the contents of the
element in the direction described by the direction
attribute as defined below, such that it begins flush with the start side of the
marquee
, and ends flush with the end side of the marquee
.
When the marquee current loop index is odd, slide the contents of the element in
the opposite direction than that described by the direction
attribute as defined below, such that it begins
flush with the end side of the marquee
, and ends flush with the start side of the
marquee
.
For example, if the direction
attribute is left (the default), then the
contents would with their right edge flush with the right inner edge of the
marquee
's content area, and the contents would then slide up to the
point where the left edge of the contents are flush with the left inner edge of the
marquee
's content area.
Once the animation has ended, the user agent is expected to increment the marquee current loop index. If the element is still turned on after this, then the user agent is expected to continue the animation.
The direction
attribute has the meanings described
in the following table:
direction attribute state
| Direction of animation | Start edge | End edge | Opposite direction |
---|---|---|---|---|
left | ← Right to left | Right | Left | → Left to Right |
right | → Left to Right | Left | Right | ← Right to left |
up | ↑ Up (Bottom to Top) | Bottom | Top | ↓ Down (Top to Bottom) |
down | ↓ Down (Top to Bottom) | Top | Bottom | ↑ Up (Bottom to Top) |
In any case, the animation should proceed such that there is a delay given by the marquee scroll interval between each frame, and such that the content moves at most the distance given by the marquee scroll distance with each frame.
When a marquee
element has a bgcolor
attribute set, the value is expected to be parsed using the rules for parsing a legacy color
value, and if that does not return failure, the user agent is expected to treat the
attribute as a presentational hint setting the element's
'background-color' property to the resulting color.
The width
and height
attributes on a marquee
element
map to the dimension properties
'width' and 'height' on the element respectively.
The natural height of a marquee
element with its direction
attribute in the up or down states is 200 CSS
pixels.
The vspace
attribute of a
marquee
element maps to the dimension
properties 'margin-top' and 'margin-bottom' on the element. The
hspace
attribute of a marquee
element maps to the dimension properties
'margin-left' and 'margin-right' on the element.
meter
element@namespace "http://www.w3.org/1999/xhtml" ;
meter { appearance : auto; }
The meter
element is a devolvable widget. Its expected native
appearance is to render as an 'inline-block' box with a 'block-size'
of '1em' and a 'inline-size' of '5em', a 'vertical-align' of '-0.2em', and
with its contents depicting a gauge.
When this element has a horizontal writing mode, the depiction is expected to be of a horizontal gauge. Its minimum value is on the right if the 'direction' property has a computed value of 'rtl', and on the left otherwise. When this element has a vertical writing mode, it is expected to depict a vertical gauge. Its minimum value is on the bottom if the 'direction' property has a computed value of 'rtl', and on the top otherwise.
User agents are expected to use a presentation consistent with platform conventions for gauges, if any.
Requirements for what must be depicted in the gauge are
included in the definition of the meter
element.
Need to detail the expected primitive appearance.
progress
element@namespace "http://www.w3.org/1999/xhtml" ;
progress { appearance : auto; }
The progress
element is a devolvable widget. Its expected
native appearance is to render as an 'inline-block' box with a
'block-size' of '1em' and a 'inline-size' of '10em', and a
'vertical-align' of '-0.2em'.
When the this element has a horizontal writing mode, the element is expected to be depicted as a horizontal progress bar. The start is on the right and the end is on the left if the 'direction' property on this element has a computed value of 'rtl', and with the start on the left and the end on the right otherwise. When this element has a vertical writing mode, it is expected to be depicted as a vertical progress bar. The start is on the bottom and the end is on the top if the 'direction' property on this element has a computed value of 'rtl', and with the start on the top and the end on the bottom otherwise.
User agents are expected to use a presentation consistent with platform conventions for progress bars. In particular, user agents are expected to use different presentations for determinate and indeterminate progress bars. User agents are also expected to vary the presentation based on the dimensions of the element.
Requirements for how to determine if the progress bar is determinate or
indeterminate, and what progress a determinate progress bar is to show, are included in the
definition of the progress
element.
Need to detail the expected primitive appearance.
select
elementThe select
element is an element with default preferred size, and
user agents are expected to apply the 'field-sizing' CSS property to
select
elements.
A select
element is either a list box or a drop-down box, depending on its attributes.
A select
element whose multiple
attribute is present is expected to render as a multi-select list box.
A select
element whose multiple
attribute is absent, and whose display size is greater
than 1, is expected to render as a single-select list box.
When the element renders as a list box, it is a devolvable widget
expected to render as an 'inline-block' box. The inline size of its
intrinsic size is the width of the select
's labels plus
the width of a scrollbar. The block size of its intrinsic size is
determined by the following steps:
If the 'field-sizing' property on the element has a computed value of 'content', return the height necessary to contain all rows for items.
If the size
attribute is absent or it has no valid
value, return the height necessary to contain four rows.
Otherwise, return the height necessary to contain as many rows for items as given by the element's display size.
A select
element whose multiple
attribute is absent, and whose display size is 1, is
expected to render as an 'inline-block' one-line drop-down box.
The inline size of its intrinsic size is the
width of the select
's labels. If the 'field-sizing'
property on the element has a computed value of
'content', the inline size of the
intrinsic size depends on the shown text. The shown text is typically the label of
an option
of which selectedness is
set to true.
When the element renders as a drop-down box, it is a devolvable
widget. Its appearance in the devolved state, as well as its appearance when the
computed value of the element's 'appearance' property is
'menulist-button'
, is that of a drop-down box, including a "drop-down button",
but not necessarily rendered using a native control of the host operating system. In such a state,
CSS properties such as 'color', 'background-color', and 'border' should
not be disregarded (as is generally permissible when rendering an element according to its
native appearance).
In either case (list box or drop-down box), the element's items are
expected to be the element's list of options,
with the element's optgroup
element children
providing headers for groups of options where applicable.
An optgroup
element is expected to be rendered by displaying the element's label
attribute.
An option
element is expected to be rendered by displaying the element's label, indented under its optgroup
element if it
has one.
Each sequence of one or more child hr
element siblings may be rendered as a single
separator.
The width of the select
's labels is the wider of the width necessary to
render the widest optgroup
, and the width necessary to render the widest
option
element in the element's list of
options (including its indent, if any).
If a select
element contains a placeholder label option, the user
agent is expected to render that option
in a manner that conveys that it is a label,
rather than a valid option of the control. This can include preventing the placeholder label
option from being explicitly selected by the user. When the placeholder label
option's selectedness is true, the control
is expected to be displayed in a fashion that indicates that no valid option is currently
selected.
User agents are expected to render the labels in a select
in such a manner that
any alignment remains consistent whether the label is being displayed as part of the page or in a
menu control.
Need to detail the expected native appearance and primitive appearance.
textarea
elementThe textarea
element is a devolvable widget expected to render as an
'inline-block' box depicting a multiline text control. If this multiline text control
provides a selection, then, when the user changes the current selection, the user agent is
expected to queue an element task on the user interaction task source
given the textarea
element to fire an event
named select
at the element, with the bubbles
attribute initialized to true.
The textarea
element is an element with default preferred size, and
user agents are expected to apply the 'field-sizing' CSS property to
textarea
elements.
If the 'field-sizing' property on the element has a computed value
of 'content', the intrinsic size is
determined from the text which the element shows. The text is either a
raw value or a short hint specified by the
placeholder
attribute. User agents may take the
text caret size into account in the intrinsic size. Otherwise, its
intrinsic size is computed from textarea effective width and
textarea effective height (as defined below).
The textarea effective width of a textarea
element is size×avg + sbw, where
size is the element's character width,
avg is the average character width of the primary font of the element, in CSS pixels, and sbw is the width of a scrollbar, in CSS pixels. (The element's 'letter-spacing' property does not
affect the result.)
The textarea effective height of a textarea
element is the height in
CSS pixels of the number of lines specified the element's character height, plus the height of a scrollbar in CSS pixels.
User agents are expected to apply the 'white-space' CSS property to
textarea
elements. For historical reasons, if the element has a wrap
attribute whose value is an ASCII
case-insensitive match for the string "off
", then the user agent is expected to treat the attribute as a presentational hint setting the element's
'white-space' property to 'pre'.
Need to detail the expected native appearance and primitive appearance.
User agents are expected to render frameset
elements as a box with the height and
width of the viewport, with a surface rendered according to the following layout
algorithm:
The cols and rows variables are lists of zero or more pairs consisting of a number and a unit, the unit being one of percentage, relative, and absolute.
Use the rules for parsing a list of dimensions to parse the value of the
element's cols
attribute, if there is one.
Let cols be the result, or an empty list if there is no such attribute.
Use the rules for parsing a list of dimensions to parse the value of the
element's rows
attribute, if there is one.
Let rows be the result, or an empty list if there is no such attribute.
For any of the entries in cols or rows that have the number zero and the unit relative, change the entry's number to one.
If cols has no entries, then add a single entry consisting of the value 1 and the unit relative to cols.
If rows has no entries, then add a single entry consisting of the value 1 and the unit relative to rows.
Invoke the algorithm defined below to convert a list of dimensions to a list of pixel
values using cols as the input list, and the width of the surface that the
frameset
is being rendered into, in CSS pixels, as the
input dimension. Let sized cols be the resulting list.
Invoke the algorithm defined below to convert a list of dimensions to a list of pixel
values using rows as the input list, and the height of the surface that the
frameset
is being rendered into, in CSS pixels, as the
input dimension. Let sized rows be the resulting list.
Split the surface into a grid of w×h rectangles, where w is the number of entries in sized cols and h is the number of entries in sized rows.
Size the columns so that each column in the grid is as many CSS pixels wide as the corresponding entry in the sized cols list.
Size the rows so that each row in the grid is as many CSS pixels high as the corresponding entry in the sized rows list.
Let children be the list of frame
and frameset
elements
that are children of the frameset
element
for which the algorithm was invoked.
For each row of the grid of rectangles created in the previous step, from top to bottom, run these substeps:
For each rectangle in the row, from left to right, run these substeps:
If there are any elements left in children, take the first element in the list, and assign it to the rectangle.
If this is a frameset
element, then recurse the entire frameset
layout algorithm for that frameset
element, with the rectangle as the
surface.
Otherwise, it is a frame
element; render its content
navigable, positioned and sized to fit the rectangle.
If there are any elements left in children, remove the first element from children.
If the frameset
element has a border, draw an outer set of borders
around the rectangles, using the element's frame border color.
For each rectangle, if there is an element assigned to that rectangle, and that element has a border, draw an inner set of borders around that rectangle, using the element's frame border color.
For each (visible) border that does not abut a rectangle that is assigned a
frame
element with a noresize
attribute (including rectangles in further nested frameset
elements), the user
agent is expected to allow the user to move the border, resizing the rectangles within, keeping
the proportions of any nested frameset
grids.
A frameset
or frame
element has a border if the
following algorithm returns true:
If the element has a frameborder
attribute whose value is not the
empty string and whose first character is either a U+0031 DIGIT ONE (1) character, a U+0079
LATIN SMALL LETTER Y character (y), or a U+0059 LATIN CAPITAL LETTER Y character (Y), then
return true.
Otherwise, if the element has a frameborder
attribute, return
false.
Otherwise, if the element has a parent element that is a frameset
element,
then return true if that element has a border, and false if it does
not.
Otherwise, return true.
The frame border color of a
frameset
or frame
element is the color obtained from the following
algorithm:
If the element has a bordercolor
attribute, and applying the
rules for parsing a legacy color value to that attribute's value does not return
failure, then return the color so obtained.
Otherwise, if the element has a parent element that is a frameset
element,
then return the frame border color of that element.
Otherwise, return gray.
The algorithm to convert a list of dimensions to a list of pixel values consists of the following steps:
Let input list be the list of numbers and units passed to the algorithm.
Let output list be a list of numbers the same length as input list, all zero.
Entries in output list correspond to the entries in input list that have the same position.
Let input dimension be the size passed to the algorithm.
Let count percentage be the number of entries in input list whose unit is percentage.
Let total percentage be the sum of all the numbers in input list whose unit is percentage.
Let count relative be the number of entries in input list whose unit is relative.
Let total relative be the sum of all the numbers in input list whose unit is relative.
Let count absolute be the number of entries in input list whose unit is absolute.
Let total absolute be the sum of all the numbers in input list whose unit is absolute.
Let remaining space be the value of input dimension.
If total absolute is greater than remaining space, then for each entry in input list whose unit is absolute, set the corresponding value in output list to the number of the entry in input list multiplied by remaining space and divided by total absolute. Then, set remaining space to zero.
Otherwise, for each entry in input list whose unit is absolute, set the corresponding value in output list to the number of the entry in input list. Then, decrement remaining space by total absolute.
If total percentage multiplied by the input dimension and divided by 100 is greater than remaining space, then for each entry in input list whose unit is percentage, set the corresponding value in output list to the number of the entry in input list multiplied by remaining space and divided by total percentage. Then, set remaining space to zero.
Otherwise, for each entry in input list whose unit is percentage, set the corresponding value in output list to the number of the entry in input list multiplied by the input dimension and divided by 100. Then, decrement remaining space by total percentage multiplied by the input dimension and divided by 100.
For each entry in input list whose unit is relative, set the corresponding value in output list to the number of the entry in input list multiplied by remaining space and divided by total relative.
Return output list.
User agents working with integer values for frame widths (as opposed to user agents that can lay frames out with subpixel accuracy) are expected to distribute the remainder first to the last entry whose unit is relative, then equally (not proportionally) to each entry whose unit is percentage, then equally (not proportionally) to each entry whose unit is absolute, and finally, failing all else, to the last entry.
The contents of a frame
element that does not have a frameset
parent
are expected to be rendered as transparent black; the user agent is expected to not
render its content navigable in this case, and its content navigable is
expected to have a viewport with zero width and zero height.
User agents are expected to allow the user to control aspects of hyperlink activation and form submission, such as which navigable is to be used for the subsequent navigation.
User agents are expected to allow users to discover the destination of hyperlinks and of forms before triggering their navigation.
User agents are expected to inform the user of whether a hyperlink includes hyperlink auditing, and to let them know at a minimum which domains will be contacted as part of such auditing.
User agents may allow users to navigate navigables to the URLs indicated by the cite
attributes on q
,
blockquote
, ins
, and del
elements.
User agents may surface hyperlinks created by link
elements in their user interface, as discussed previously.
title
attributeUser agents are expected to expose the advisory information of elements upon user request, and to make the user aware of the presence of such information.
On interactive graphical systems where the user can use a pointing device, this could take the form of a tooltip. When the user is unable to use a pointing device, then the user agent is expected to make the content available in some other fashion, e.g. by making the element a focusable area and always displaying the advisory information of the currently focused element, or by showing the advisory information of the elements under the user's finger on a touch device as the user pans around the screen.
U+000A LINE FEED (LF) characters are expected to cause line breaks in the tooltip; U+0009 CHARACTER TABULATION (tab) characters are expected to render as a nonzero horizontal shift that lines up the next glyph with the next tab stop, with tab stops occurring at points that are multiples of 8 times the width of a U+0020 SPACE character.
For example, a visual user agent could make elements with a title
attribute focusable, and could make
any focused element with a title
attribute
show its tooltip under the element while the element has focus. This would allow a user to tab
around the document to find all the advisory text.
As another example, a screen reader could provide an audio cue when reading an element with a tooltip, with an associated key to read the last tooltip for which a cue was played.
The current text editing caret (i.e. the active range, if it is empty and in an editing host), if any, is expected to act like an inline replaced element with the vertical dimensions of the caret and with zero width for the purposes of the CSS rendering model.
This means that even an empty block can have the caret inside it, and that when the caret is in such an element, it prevents margins from collapsing through the element.
User agents are expected to honor the Unicode semantics of text that is exposed in user interfaces, for example supporting the bidirectional algorithm in text shown in dialogs, title bars, popup menus, and tooltips. Text from the contents of elements is expected to be rendered in a manner that honors the directionality of the element from which the text was obtained. Text from attributes is expected to be rendered in a manner that honours the directionality of the attribute.
Consider the following markup, which has Hebrew text asking for a programming language, the languages being text for which a left-to-right direction is important given the punctuation in some of their names:
< p dir = "rtl" lang = "he" >
< label >
בחר שפת תכנות:
< select >
< option dir = "ltr" > C++</ option >
< option dir = "ltr" > C#</ option >
< option dir = "ltr" > FreePascal</ option >
< option dir = "ltr" > F#</ option >
</ select >
</ label >
</ p >
If the select
element was rendered as a drop down box, a correct rendering would
ensure that the punctuation was the same both in the drop down, and in the box showing the
current selection.
The directionality of attributes depends on the attribute and on the element's dir
attribute, as the following example demonstrates. Consider this
markup:
< table >
< tr >
< th abbr = "(א" dir = ltr > A
< th abbr = "(א" dir = rtl > A
< th abbr = "(א" dir = auto > A
</ table >
If the abbr
attributes are rendered, e.g. in a tooltip or
other user interface, the first will have a left parenthesis (because the direction is 'ltr'),
the second will have a right parenthesis (because the direction is 'rtl'), and the third will
have a right parenthesis (because the direction is determined from the attribute value
to be 'rtl').
However, if instead the attribute was not a directionality-capable attribute, the results would be different:
< table >
< tr >
< th data-abbr = "(א" dir = ltr > A
< th data-abbr = "(א" dir = rtl > A
< th data-abbr = "(א" dir = auto > A
</ table >
In this case, if the user agent were to expose the data-abbr
attribute
in the user interface (e.g. in a debugging environment), the last case would be rendered with a
left parenthesis, because the direction would be determined from the element's
contents.
A string provided by a script (e.g. the argument to window.alert()
) is expected to be treated as an independent set of one or
more bidirectional algorithm paragraphs when displayed, as defined by the bidirectional algorithm,
including, for instance, supporting the paragraph-breaking behavior of U+000A LINE FEED (LF)
characters. For the purposes of determining the paragraph level of such text in the bidirectional
algorithm, this specification does not provide a higher-level override of rules P2 and
P3. [BIDI]
When necessary, authors can enforce a particular direction for a given paragraph by starting it with the Unicode U+200E LEFT-TO-RIGHT MARK or U+200F RIGHT-TO-LEFT MARK characters.
Thus, the following script:
alert( '\u05DC\u05DE\u05D3 HTML \u05D4\u05D9\u05D5\u05DD!' )
...would always result in a message reading "למד LMTH היום!" (not "דמל HTML םויה!"), regardless of the language of the user agent interface or the direction of the page or any of its elements.
For a more complex example, consider the following script:
/* Warning: this script does not handle right-to-left scripts correctly */
var s;
if ( s = prompt( 'What is your name?' )) {
alert( s + '! Ok, Fred, ' + s + ', and Wilma will get the car.' );
}
When the user enters "Kitty", the user agent would alert "Kitty! Ok, Fred, Kitty, and Wilma will get the car.". However, if the user enters "لا أفهم", then the bidirectional algorithm will determine that the direction of the paragraph is right-to-left, and so the output will be the following unintended mess: "لا أفهم! derF ,kO, لا أفهم, rac eht teg lliw amliW dna."
To force an alert that starts with user-provided text (or other text of unknown directionality) to render left-to-right, the string can be prefixed with a U+200E LEFT-TO-RIGHT MARK character:
var s;
if ( s = prompt( 'What is your name?' )) {
alert( ' \u200E ' + s + '! Ok, Fred, ' + s + ', and Wilma will get the car.' );
}
User agents are expected to allow the user to request the opportunity to obtain a physical
form (or a representation of a physical form) of a Document
. For example,
selecting the option to print a page or convert it to PDF format. [PDF]
When the user actually obtains a physical form (or
a representation of a physical form) of a Document
, the user agent is expected to
create a new rendering of the Document
for the print media.
HTML user agents may, in certain circumstances, find themselves rendering non-HTML documents that use vocabularies for which they lack any built-in knowledge. This section provides for a way for user agents to handle such documents in a somewhat useful manner.
While a Document
is an unstyled document, the user agent is expected
to render an unstyled document view.
A Document
is an unstyled document while it matches the following
conditions:
Document
has no author style sheets (whether referenced by HTTP headers, processing instructions, elements like link
, inline elements like style
, or any other mechanism).
Document
have any presentational hints.
Document
have any style attributes.
Document
are in any of the following namespaces: HTML namespace, SVG namespace, MathML namespace
Document
has no focusable area (e.g. from XLink) other than the viewport.
Document
has no hyperlinks (e.g. from XLink).
Window
object with
this Document
as its associated
Document
.
Document
have any registered event listeners.
An unstyled document view is one where the DOM is not rendered according to CSS
(which would, since there are no applicable styles in this context, just result in a wall of
text), but is instead rendered in a manner that is useful for a developer. This could consist of
just showing the Document
object's source, maybe with syntax highlighting, or it
could consist of displaying just the DOM tree, or simply a message saying that the page is not a
styled document.
If a Document
stops being an unstyled document, then the
conditions above stop applying, and thus a user agent following these requirements will switch to
using the regular CSS rendering.